Temperature Settings:
• Large display with your current indoor temperature (°F or °C).
• Heating and Cooling Setpoint Indicators (Ball) on the horseshoe dial.
• Heating and Cooling Setpoint numerical values displayed at the ends of horseshoe dial.
• To change the temperature, touch the Setpoint Indicator (Ball) or the numerical value and adjust the temperature.
Current Outdoor Temperature and Weather Forecast
• Displays current outdoor temperature in °F or °C and the current weather forecast (touching the outdoor temperature will display the 7 day weather forecast and the outdoor air quality). The default outdoor temperature is supplied by the outdoor air temperature sensor or the Wi-Fi data connection (homeowner selectable on the thermostat). The outdoor sensor is furnished as standard with Lennox® Communicating outdoor units, optional for conventional units.
Time & Date Display
Humidity
• Displays current inside relative humidity below current indoor temperature.
Away
• The user can manually put the system into Away Mode by pressing thev Away icon, located on the bottom left-hand side of the home screen. When the system is in Away, a status notification (Away is Active) is displayed on the right-hand side of the home screen.
• In order to exit Away, select Cancel located on the bottom left-hand side of the home screen. Selecting the Away is Active status notification will display the current set point range for high and low temperature settings. There is also the option to select Cancel here as well by selecting Yes.
• While in Away, the Away Set points are used to control the high and low temperature setting for the thermostat and all zones simultaneously if Smart Zoning is installed. The Away Set points can be changed from the default values by going to Menu > Settings > Away.
Temp
• Returns to the thermostat home screen or the home screen for a specific zone if Smart Zoning is installed. Displays current temperature screen for the current system where the thermostat and sensors are located.
• Select the Temp button from the Status or My Home screen to return to the thermostat home screen or last zone viewed.
Status
• Displays current system operating status for the current system/area where the thermostat and sensors are located. Details such as humidity levels, Feels Like being active, any of the various fan modes and various other system background activities.
My Home
• This screen will display multiple thermostats in the home. It will also display other devices such as Lennox Smart Zoning (up to four zones per thermostat), Lennox Smart Room Sensor, Lennox Smart Air Quality Monitor, Lennox Wireless Extender and PureAir S.
• Selecting any item on this screen will display the detail screen for that device.
• A yellow or red dot with an explanation point indicates there is an alert condition for that specific device.
